TM 1-1520-238-23
2-390.12
Change 8
2.107C. VERTICAL STABILIZER SPAR BOX BUSHING REPLACEMENT (AVIM) – continued
2.107C.3. Removal
a. Remove spar box bushing (1) from stabilizer
mount bore (2).
(1) Remove bushing (1) from fitting (2). Use
Vertical stabilizer bushing tool set (item 394,
App H).
2.107C.4. Cleaning
a. Wipe removed attaching parts and mounting
surfaces with a clean rag dampened in sol-
vent. (para 1.47).
2.107C.5. Inspection
NOTE
If bushing mating bore diameter ex-
ceeds the largest dimension of OVS 2
in table 1-1, the part is nonrepairable
and shall be replaced.
a. Check removed attaching parts for damage
(para 2.102).
b. Check removed attaching parts for corrosion
(para 2.102).
c. Check mounting surfaces for cracks and cor-
rosion (para 2.102).
GO TO NEXT PAGE
M04-5228-2
1
1
2
M04-5228-3
