TM 1-1520-238-23
2-476
Change 7
2.133.
NO. 1 ENGINE NACELLE REMOVAL/INSTALLATION – continued
(2) Remove two bolts (83), four washers (84),
and two nuts (85) from middle section of sup-
port (82).
(3) Remove two bolts (86), four washers (87),
and two nuts (88) from bottom section of sup-
port (82).
(4) Remove nacelle (54) from support (82).
2.133.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.133.5. Inspection
a. Check nacelle for damage (para 2.128).
b. Check nacelle and support mating surfaces
for damaged EMI conductive coating. Repair
door and mating surface (para 2.34).
c. Check nacelle strut attachment area for
cracks.
(1) If cracks are suspected, perform nondestruc-
tive inspection (TM 1-1520-264-23).
GO TO NEXT PAGE
M04-4109-22
84
83
82
84
85
87
86
82
87
88
54
M04-4109-23
