TM 1-1520-238-23
2-525
2.140.
STRUCTURAL SUPPORT STRUT DISASSEMBLY/ASSEMBLY (AVIM) – continued
j. Remove end cap (21) from outer tube (20). Use
strap wrench.
k. Remove and discard bearing (22) from end
cap (21) (TM 55-1500-322-24). Use arbor press.
2.140.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
2.140.5. Inspection
a. Check strut assembly for cracks. None al-
lowed.
b. Check strut assembly for corrosion (para
1.49).
c. Check strut assembly threads for damage.
None allowed.
2.140.6. Assembly
a. Install seal assembly (6) on tube (3). Use body
seal pilot.
(1) Install body seal pilot on end of tube (3) finger
tight.
(2) Push rear of tube (3) through seal assembly
(6). Position seal assembly (6) just above
threads of tube (3).
(3) Remove body seal pilot.
GO TO NEXT PAGE
M04-4111-9
20
21
M04-4111-10
21
22
3
6
M04-4111-11
BODY SEAL
PILOT
