TM 1-1520-238-23
2-621
2.172.
PILOT/CPG ARMORED CREW SEAT CONTROL ASSEMBLY
REMOVAL/INSTALLATION – continued
d. Remove cable (9) from yoke (10).
(1) Remove lockwire from two jam nuts (11).
(2) Remove pin spring (12) from track (13).
(3) Hold back compression spring (14). Remove
slotted washer (15) and vertical lock pin (16).
(4) Hold yoke (10). Remove cable (9), jam nuts
(11), and spring (14).
(5) Slide yoke (10) from track (13).
2.172.4. Cleaning
a. Wipe handle and yoke attachment areas with
a clean rag.
2.172.5. Inspection
a. Check handle and yoke attachment areas for
corrosion (para 1.49).
b. Check handle and yoke attachment areas for
cracks. None allowed.
2.172.6. Installation
a. Install handle (1) on seat (2). Torque two nuts
(6) to 15 INCH-POUNDS.
(1) Install two screws (4), six washers (5), two
nuts (6), and handle (1) on seat (2).
(2) Torque two nuts (6) to 15 INCH-POUNDS.
Use torque wrench.
(3) Install seat cushion (3) on seat (2).
GO TO NEXT PAGE
M04-4153-4
2
12
13
9
10
11
14
15
16
11
M04-4153-5
1
2
3
4
5
6
5
5
5
6
5
4
