TM 1-1520-238-23
Change 4
4-43
4.15.
ENGINE TEARDOWN NO. 1 AND NO. 2 ENGINE AIR INLET REMOVAL continued
4.15.3. Removal
NOTE
This task is typical for No. 1 or No. 2
engine air inlet.
If seals are to be replaced, go to para-
graph 4.83.
a. Remove air inlet (1) from engine inlet (2).
(1) Loosen nut (3).
(2) Remove nut (4).
(3) Open coupling (5) and remove from flanges
(6) and (7).
(4) Pull air inlet (1) forward until support (8) is
clear of anti-ice tube (9).
(5) Remove and discard packing (10).
4.15.4. Cleaning
a. Clean engine inlet and air inlet (para 1.47).
4.15.5. Inspection
a. Check air tube for holes, cracks, or dents
(para 4.2).
b. Check air inlet assembly and seals for cracks,
dents, rips, or tears (para 4.2).
GO TO NEXT PARAGRAPH
M04-1010-3A
3
1
2
4
5
7
6
M04-1010-4A
1
8
10
9
M04-1010-5