TM 1-1520-238-23
5-183
5.40.
MAIN ROTOR DROOP STOP FOLLOWER REPAIR (AVIM) – continued
5.40.4. Cleaning
a. Wipe follower and plunger. Use cloth (item 52,
App F).
5.40.5. Inspection
a. Check follower and plunger for wear and dam-
age (para 5.38).
b. Check follower and plunger corrosion (para
1.49).
5.40.6. Installation
a. Apply primer to mating surface of replace-
ment roller (5). Use epoxy primer coating kit
(item 78, App F).
(1) Insert roller (5) in plunger (4) while primer is
wet.
b. Install pins (2) and (3) in plunger (4).
(1) Aline holes in roller (5) with holes in plunger
(4).
(2) Drive pin (2) in until approximately 1/16 INCH
below surface of plunger (4).
(3) Rotate plunger (4) 90 degrees.
(4) Drive pin (3) in until approximately 1/16 INCH
below surface of plunger (4).
c. Inspect (QA).
END OF TASK
4
3
5
2
PRIMER AREA
M04-252-4
M04-252-3
ROTATE
PLUNGER 90º
3
2
