TM 1-1520-238-23
Change 1
4-194.1
4.60.
NO. 2 ENGINE LOUVER REMOVAL continued
g. Remove connector (J578) bracket (21) from
louver (1).
(1) Remove two screws (22) and washers (23).
(2) Move bracket (21) buildup to clear louver (1)
and secure.
h. Remove wire harness bracket (24) from aft
end of louver (1).
(1) Remove two screws (25) and washers (26).
(2) Move bracket (24) buildup upward to clear
louver (1) and secure.
i. Remove fwd angle (27) from louver(1).
(1) Remove eight screws (28) and washers (29).
j. Remove aft angle (30) from louver (1).
(1) Remove eight screws (31) and washers (32).
GO TO NEXT PAGE
M04-1029-11
1
21
1
22
23
M04-1029-12
25
26
1
24
WIRES DELETED FOR CLARITY
28
29
1
27
M04-1029-18
31
1
30
M04-1029-13
32