TM 1-1520-238-23
4-267
4.83.
ENGINE AIR INLET ASSEMBLY SEAL REPLACEMENT – continued
b. Remove seal (5) from air inlet assembly (4).
(1) Loosen end of seal (5) with a putty knife.
(2) Pull seal (5) free of air inlet (4)
(3) Discard seal (5).
c. Remove seal (6) from air inlet assembly (4).
(1) Loosen end of seal (6) with a putty knife.
(2) Pull seal (6) free of air inlet (4).
(3) Discard seal (6).
4.83.4. Cleaning
a. Remove old adhesive from seal attachment
area (para 1.47).
4.83.5. Inspection
a. Check air inlet for dents (para 4.2).
b. Check inlet for cracks (para 4.2). All cracks
must be repaired (TM 1-1500-204-23).
GO TO NEXT PAGE
M04-3923-3
4
5
4
6
M04-3923-4
