TM 1-1520-238-23
5-94
Change 1
5.18.
MAIN ROTOR BLADE IDENTIFICATION PLATE REPLACEMENT – continued
NOTE
This task is typical for the identification
plate and the part number/serial num-
ber plate.
The part number/serial number plate
and identification plate will be referred
to as the identification plate in this
task.
5.18.3. Removal
a. Record all data found on identification plate
(1).
b. Remove plate (1) from main rotor blade (2).
(1) Peel up corner of plate (1). Use putty knife.
(2) Remove plate (1) from blade (2).
(3) Discard plate (1).
5.18.4. Cleaning
a. Clean plate mounting area. Use methyl ethyl
ketone (item 124, App F) (para 1.47).
5.18.5. Inspection
a. Inspect blade for cracks, scratches, nicks,
gouges, dents, and depressions (para 5.1).
b. Inspect blade for corrosion (para 1.49).
GO TO NEXT PAGE
M04-3837-2
1
2
