TM 1-1520-238-23
7-462
7.120.
SHAFT DRIVEN COMPRESSOR (SDC) REMOVAL – continued
7.120.3. Removal
a. Loosen retainer clamp (1).
b. Slide housing (2) on inlet duct (3) until clear of
inlet (4).
c. Remove exhaust hose (5).
(1) Loosen clamp (6).
(2) Remove hose (5) from surge valve (7).
d. Remove interconnect hose (8) from union (9).
(1) Hold union (9). Remove nut (10).
e. Remove surge valve pressure hose (11) from
union (12).
(1) Hold union (12). Remove nut (13).
GO TO NEXT PAGE
4
2
1
3
5
10
11
6
12
13
9
8
7
M04-068-2
