TM 1-1520-238-23
7-475
7.123.
SDC TEMPERATURE SENSOR REMOVAL/INSTALLATION – continued
7.123.6. Installation
a. Install sensor (1) on plug (2). Torque to 80
INCH-POUNDS.
(1) Lubricate and install new packing (5) on sen-
sor (1). Use petrolatum (item 138, App F).
(2) Hold plug (2). Use crowfoot.
(3) Install sensor (1) on plug (2). Torque to 80
INCH-POUNDS. Use torque wrench.
(4) Attach connector P1323 (3) to receptacle
(S132)J1 (4).
b. Inspect (QA).
c. Perform pressurized air system maintenance
operational check (TM 1-1520-238-T).
d. Secure access doors T250L, T250R, T290L,
T290R, and L325 (para 2.2).
END OF TASK
1
5
2
3
4
M04-3501-3
