TM 1-1520-238-23
Change 2
7-513
7.134.
SURGE VALVE BRACKET REMOVAL/INSTALLATION – continued
7.134.6. Installation
a. Install bracket (17) on SDC (26).
(1) Apply sealing compound around mounting
holes on both sides of bracket (17). Use
sealing compound (item 156A, App F).
(2) Install washers (30) (use same number as
counted).
(3) Install bracket (17).
(4) Install two washers (29) and nuts (28).
NOTE
Top clamp will not be tightened and
torqued at this time. It will be accom-
plished at a later step.
b. Install new hose (25) on SDC (26). Torque
clamp (27) to 17 INCH-POUNDS.
(1) Install two clamps (18) and (27) on hose (25).
(2) Slide hose (25) over inlet of SDC (26).
(3) Torque clamp (27) to 17 INCH-POUNDS. Use
torque wrench, screwdriver bit, and hexagon
screwdriver.
GO TO NEXT PAGE
2530
29
28
17
28
29
30
27
26
M04-2641-7
18
