TM 1-1520-238-23
Change 8
6-207
6.43.
MAIN TRANSMISSION GENERATOR SEAL REPLACEMENT – continued
6.43.3. Removal
a. Remove roller bearing retainer (1) with seal
(2).
(1) Remove retaining ring (3).
(2) Remove retainer (1) with seal (2) from gener-
ator (4). Use puller set.
b. Remove seal (2) from retainer (1).
(1) Position retainer (1) in arbor press with
threaded end up. Use arbor press.
(2) Remove seal (2).
(3) Remove and discard packing (5).
6.43.4. Cleaning
a. Wipe retainer and generator mounting pad
with a clean rag.
6.43.5. Inspection
a. Check retainer and generator mounting pad
for cracks. None allowed.
b. Check retainer and generator mounting pad
for corrosion (para 1.49).
GO TO NEXT PAGE
M04-483-3
3
2
1
TYPICAL TWO PLACES
4
M04-483-4
1
4
PULLER
M04-483-5B
ARBOR PRESS
1
5
1
2
