TM 1-1520-238-23
6-261
6.57.
MAIN TRANSMISSION IDENTIFICATION PLATE REPLACEMENT
6.57.1. Description
This task covers:
Removal. Cleaning. Installation.
6.57.2. Initial Setup
Tools:
Aircraft maintenance tool kit (item 372, App H)
Light duty laboratory apron (item 27, App H)
Metal stamping die set (item 107, App H)
Chemical protective gloves (item 154, App H)
1 1/4-inch blade putty knife (item 199, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Adhesive (item 13, App F)
Brush (item 34, App F)
Isopropyl alcohol (item 106, App F)
Personnel Required:
68D
Aircraft Powertrain Repairer/NDI
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-344-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access panel R200 removed
WARNING
FLIGHT SAFETY PART
The main transmission is a flight safe-
ty part. Failure to follow maintenance
instructions may result in serious
injury or death of crewmembers
and/or serious damage to the
helicopter.
6.57.3. Removal
a. Record all identification data found on identi-
fication plate (1).
b. Remove plate (1) from main transmission (2).
(1) Peel up corner of plate (1). Use putty knife.
(2) Remove and discard plate (1) from transmis-
sion (2).
GO TO NEXT PAGE
1
M04-3804-1
2
