TM 1-1520-238-23
6-361
6.82.
MAIN TRANSMISSION LUBE SYSTEM HOSE (RIGHT SIDE) REPLACEMENT – continued
d. Install hose (18) on coupling half (19). Torque
nut (20) to 245 INCH-POUNDS.
(1) Position hose (18) on coupling half (19).
(2) Hand tighten nut (20) on coupling half (19).
(3) Hold coupling half (19). Install nut (20).
Torque nut (20) to 245 INCH-POUNDS. Use
crowfoot and torque wrench.
CAUTION
To prevent chafing, install hose through
outboard louver support hole.
e. Install hose (1) in support (16).
(1) Install grommet (17) on hose (1).
(2) Push hose (1) through outboard hole of sup-
port (16).
(3) Install grommet (17) in support (16).
f. Install clamp (13) on hose (1).
(1) Position clamp (13).
(2) Install screw (14) and washer (15) in clamp
(13).
g. Install hose (1) on exchanger (10). Torque nut
(12) to 345 INCH-POUNDS.
(1) Hand tighten nut (12) on union (11).
(2) Torque nut (12) to 345 INCH-POUNDS. Use
torque wrench and crowfoot.
GO TO NEXT PAGE
M04-3878-12
18
20
19
12
10
1
17
16
M04-3878-13
11
M04-3878-14
14
15
13
1
