TM 1-1520-238-23
6-377
6.86.
HEAT EXCHANGER INSTALLATION – continued
c. Install exchanger (2).
(1) Position exchanger (2) over transmission
cooling louvers (11).
(2) Install 16 screws (12) and washers (13).
d. Install inlet hose (14) and outlet hose (15) on
exchanger (2). Torque nut (16) to 245 INCH-
POUNDS. Torque nut (17) to 345 INCH-
POUNDS.
(1) Hold union (8). Install nut (16).
(2) Torque nut (16) to 245 INCH-POUNDS. Use
crowfoot and torque wrench.
(3) Hold union (6). Install nut (17).
(4) Torque nut (17) to 345 INCH- POUNDS. Use
crowfoot and torque wrench.
NOTE
To install left exchanger, perform steps e,
f, and h. For right exchanger, perform
step g.
e. For left exchanger (2) installation, install two
brackets (18) and clamps (19).
(1) Aline two brackets (18) on fourth hole from
top and second hole from bottom on ex-
changer (2).
(2) Install two screws (20) and washers (21).
(3) Install two screws (22) through clamps (19)
and brackets (18).
(4) Install two washers (23) and nuts (24).
GO TO NEXT PAGE
M04-462-4
2
13
12
11
M04-462-5
17
15
16
14
8
2
6
23
24
19
22
20
21
18
21
20
22
19
24
M04-462-7
23
2
18
