TM 1-1520-238-23
6-451
6.104.
TRANSMISSION REMOVAL – DISCONNECT RIGHT SIDE – continued
NOTE
Place rag under right side of transmission
prior to disassembly.
a. Remove blade de-ice system controller (para
12.55).
b. Remove No. 2 engine drive shaft (para 6.2).
c. Remove right nose gearbox diffuser (para
6.33).
d. Remove main transmission No. 2 engine input
coupling (para 6.3).
e. Remove right forward side transmission strut
(para 2.93).
f. Remove right aft side transmission strut (para
2.95).
g. Remove main transmission temperature
transducer (para 6.42).
h. Remove main transmission right bowl and fil-
ter element (para 6.61).
i. Remove three wire harness clamps (1) and
clamps (2) from airframe (3).
(1) Remove screw (4) and washer (5), clamp (2),
spacer (6), clamp (1), and spacer (7).
j. Remove generator electrical lead (8) from
ground stud GS480 (9).
(1) Remove nut (10), washer (11), and lead (8)
from stud (9).
(2) Remove ties (12).
GO TO NEXT PAGE
M04-2964-9
TYPICAL THREE PLACES
4
2
1
7
6
5
3
M04-2964-7
9
10
11
8
12
