TM 1-1520-238-23
6-486
Change 8
6.115.
MAIN TRANSMISSION INPUT DRIVE CLUTCH REMOVAL/INSTALLATION – continued
6.115.6. Installation
a. Lock rotor brake (if transmission is installed)
(para 1.62).
b. Install clutch (9) in transmission (7). Torque
clamp nut (11) 145 to 165 FOOT-POUNDS.
(1) Install clutch (9) in transmission (7).
(2) Install nut (11) in clutch (9).
(3) Torque nut (11) to 145 FOOT-POUNDS. Use
3-inch extension and torque wrench.
(4) Increase torque to aline retainer holes, but do
not torque nut (11) over 165 FOOT-POUNDS.
Use 3-inch extension and torque wrench.
(5) Install retainer (10) in nut (11).
c. Unlock rotor brake (para 1.62).
d. Inspect (QA).
e. Install cover (1) in flange (2).
(1) Lubricate new packing (5). Use petrolatum
(item 138, App F).
(2) Install packing (5) on cover (1).
(3) Install cover (1) in flange (2).
(4) Install retaining ring (3) on flange (2).
GO TO NEXT PAGE
7
9
10
11
M04-0506-4A
1
2
M04-0506-5A
5
2
M04-0506-6
3
