TM 1-1520-238-23
6-512
Change 4
6.124.
INTERMEDIATE GEARBOX INPUT SEAL ASSEMBLY REMOVAL/INSTALLATION – continued
CAUTION
Do not apply any direct physical shock to
seal assembly or damage to seal assem-
bly may occur.
NOTE
The seal assembly is a two-piece
magnetic seal. Ensure both halves of
seal assembly are removed.
The two-piece seal assembly shall be
kept as a matched unit.
b. Remove input seal assembly (10) from retain-
er (1) and input gear (11).
(1) Remove seal half (12) from retainer (1) by
hand. Discard packing (13).
(2) Remove seal half (14) from input gear (11).
Discard packing (15).
c. Remove and discard spacer (16) from gearbox
(2).
GO TO NEXT PAGE
12
1
13
10
M04-2768-9
M04-2768-1
2
11
16
15
14
10
