TM 1-1520-238-23
6-594
Change 4
6.144.
TAIL ROTOR GEARBOX STRUT DISASSEMBLY/ASSEMBLY – continued
c. Adjust rod end (7) and clevis (5).
(1) Position clevis (5) on fitting (9) with bushing
side of clevis (5) facing up.
(2) Position rod end (7) in collar clevis (10).
(3) Adjust rod end (7) and clevis (5) so that bolt
holes aline with collar clevis (10) and fitting
(9) and strut (4) is centered between rod end
(7) and clevis (5).
d. Install strut (4) on collar clevis (10). Torque nut
(11) to 300 INCH-POUNDS.
(1) Install bushing (12) in collar clevis (10).
(2) Install bolt (13) through collar clevis (10) from
opposite side of bushing.
(3) Install washer (14) and new nut (11).
(4) Hold bolt (13). Torque nut (11) to 300 INCH-
POUNDS. Use torque wrench.
e. Install strut (4) on fitting (9). Torque nut (15) to
300 INCH-POUNDS.
(1) Install bushing (16) in clevis (5).
(2) Install bolt (17) through clevis (5) and fitting
(9) from opposite side of bushing.
(3) Install washer (18) and new nut (15).
(4) Hold bolt (17). Torque nut (15) to 300 INCH-
POUNDS. Use torque wrench.
f. Apply sealing compound to head of bolts (13)
and (17), washers (14) and (18), and nuts (11)
and (15). Use sealing compound (item 158A,
App F).
GO TO NEXT PAGE
14
M04-3707-6A
11
13
12
10
15
18
16
9
4
17
5
7
