TM 1-1520-238-23
Change 5
7-78.9
7.21B.
PRIMARY HYDRAULIC GSE FILL PORT FIVE MICRON CARTRIDGE FILTER ASSEMBLY
REPLACEMENT (ADG) – continued
7.21B.6. Installation
CAUTION
To prevent filter assembly from being
installed backwards ensure arrow on fil-
ter points aft. Failure to comply could
result in damage to equipment.
NOTE
Do not torque nuts at this time to allow for
alinement of components.
a. Install elbow (10) on filter (4).
(1) Lubricate elbow (10), packing (17), and re-
tainer packing (18). Use clean hydraulic fluid
(item 92, App F).
(2) Install nut (16), retainer packing (18), and
packing (17), on elbow (10).
(3) Install elbow (10) in filter (4).
b. Install elbow (5) on filter (4).
(1) Lubricate elbow (5), packing (20), and retain-
er packing (21). Use clean hydraulic fluid
(item 92, App F).
(2) Install nut (19), retainer packing (21), and
packing (20) on elbow (5).
(3) Install elbow (5) in filter (4).
c. Install filter (4) on bracket (12).
(1) Align filter (4) on bracket (12).
(2) Install two bolts (13) through two washers
(14), filter (4), two spacers (15), and bracket
(12).
GO TO NEXT PAGE
M04-5178-7
10
16
18
14
4
15
13
12
5
21
19
20
17
