TM 1-1520-238-23
7-280
7.68.
UTILITY HYDRAULIC MANIFOLD PRESSURE TRANSDUCER REPLACEMENT – continued
7.68.6. Installation
a. Install new packings (4) and (5) on new trans-
ducer (1).
(1) Lubricate packings (4) and (5). Use clean
hydraulic fluid (item 92, App F).
(2) Install packing (4) in port (6).
(3) Install packing (5) on connector (7).
b. Install transducer (1) on manifold (2). Torque
four screws (3) to 22 INCH-POUNDS.
(1) Aline transducer (1) on manifold (2).
(2) Install four screws (3).
(3) Torque four screws (3) to 22 INCH-POUNDS.
Use hexagon screwdriver and torque wrench.
c. Apply sealing compound around entire base
of transducer (1) where it contacts manifold
(2) and around four screws (3). Use sealing
compound (item 174, App F).
d. Allow sealing compound to dry for 24 HOURS
at 65 F (18 C) minimum.
GO TO NEXT PAGE
M04-846-4
6
4
1
5
7
M04-846-5
2
1
3
