TM 1-1520-238-23
9-258
9.72.
PILOT EXT LT/INTR LT PANEL L CSL VARIABLE RESISTOR REPLACEMENT (AVIM) – continued
b. Check removed and attaching parts for corro-
sion (para 1.49).
9.72.6. Installation
a. Install new resistor (4) on panel (6).
(1) Install resistor (4) through washer (9) and
panel (6).
(2) Position resistor (4) so that tab (10) seats in
locator hole (11).
(3) Install lockwasher (8) and nut (7).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
b. Solder wires (3) to resistor (4).
(1) Solder identified wires (3) to terminals (5).
Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
c. Apply sealant to screws (1). Use sealing
compound (item 167, App F).
d. Install four screws (1) through panel (6) and
into tube assemblies (2).
e. Inspect (QA).
f. Install pilot EXT LT/INTR LT panel light indicat-
ing panel (para 9.64).
END OF TASK
4
6
8
7
M04-1393-4
11
10
9
2
1
M04-1393-5
3
3
4
5
6
