TM 1-1520-238-23
9-369
9.102.
LANDING/SEARCHLIGHT LAMP REPLACEMENT – continued
c. Remove lamp (1) from searchlight (2).
(1) Loosen three captive screws (3).
(2) Remove retaining ring (4). Lower lamp (1).
d. Detach two wires (5) from lamp (1).
(1) Identify two wires (5).
(2) Remove two screws (6).
9.102.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
9.102.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.102.6. Installation
a. Attach two wires (5) to lamp (1).
(1) Install screws (6) through wires (5) into lamp
(1).
b. Install lamp (1) in searchlight (2).
(1) Position lamp (1) in searchlight (2). Install re-
taining ring (4).
(2) Tighten three captive screws (3).
c. Inspect (QA).
d. Perform landing/searchlight maintenance op-
erational check (TM 1-1520-238-T).
END OF TASK
2
1
M04-3622-2
3
4
6
5
M04-3622-3
2
3
1
