TM 1-1520-238-23
9-470
Change 7
9.125.
TEMPERATURE ALARM CONTROL UNIT REPLACEMENT – continued
9.125.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.125.5. Inspection
a. Check connectors for damaged pins, cracks,
cuts, or broken wires (para 9.104).
b. Check removed and attaching parts for dam-
age (para 9.104).
c. Check wires for wear, cuts, and breaks (para
9.104).
d. Check removed and attaching parts for corro-
sion (para 1.49).
9.125.6. Installation
a. Install temperature alarm control unit (1).
(1) Position control unit (1) on mount (6).
(2) Install four washers (5) and screws (4).
(3) Attach connector (2) to receptacle J1 (3).
b. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.1 OHM or less. Use
ohmmeter.
c. Inspect (QA).
d. Install access covers L545 and R545 (para
2.2).
e. Perform drive system maintenance opera-
tional check (TM 1-1520-238-T).
END OF TASK
