TM 1-1520-238-23
11-415
11.94.
CPG TO PILOT LATERAL F.S. 111.50 BRACKET ASSEMBLY
REMOVAL/INSTALLATION – continued
11.94.6. Installation
a. Install bracket (8) on airframe (14).
(1) Aline bracket (8) with airframe (14).
(2) Install three bolts (17) through bracket (8) and
airframe (14).
(3) Install three washers (16) and nuts (15).
CAUTION
To prevent damage to flight control sys-
tem components, do not use force to
aline bellcrank with bracket or to aline
push-pull rod with bellcrank.
b. Install bellcrank (2) on bracket (8). Torque nut
(10) 30 to 40 INCH-POUNDS.
(1) Aline bellcrank (2) with bracket (8).
(2) Install bolt (11) through washer (12), bushing
(13), bracket (8), and bellcrank (2).
(3) Check fit of self-retaining bolt (11) (para 11.1).
(4) Install nut (10). Torque nut (10) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (9).
GO TO NEXT PAGE
M04-4324-6
15
16
16
17
15
15
16
17
8
17
14
2
10
9
13
12
11
8
M04-4324-7
