TM 1-1520-238-23
11-500
11.113.
LONGITUDINAL F.S. 82.80 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
b. Install adjustable end of rod (1) on bellcrank
(2). Torque nut (4) 30 to 40 INCH-POUNDS.
(1) Aline rod (1) with bellcrank (2).
(2) Install bolt (5) through washer (6), bushing
(7), bellcrank (2), and rod (1).
(3) Check fit of self-retaining bolt (5) (para 11.1).
(4) Install nut (4). Torque nut (4) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (3).
c. Inspect (QA).
d. Perform longitudinal flight control rigging
maintenance
operational
check
(TM 1-1520-238-T).
e. Install access covers B80R and B85R (para
2.2).
f. Install flex chute, turret, and area weapon
(TM 9-1090-208-23).
END OF TASK
M04-4306-6
1
2
5
6
7
4
3
