TM 1-1520-238-23
11-514
11.117.
CPG TO PILOT LONGITUDINAL F.S. 96.59 CONTROL BRACKET ASSEMBLY
REMOVAL/INSTALLATION – continued
b. Remove bellcrank (2) from bracket assembly
(8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), and bushing
(13) from bracket (8) and bellcrank (2).
(4) Remove bellcrank (2) from bracket (8).
(5) Remove bearing (14) and bushing (15) from
bellcrank (2).
c. Remove bracket (8) from airframe (16).
(1) Remove four bolts (17) and washers (18).
(2) Remove bracket (8).
11.117.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.117.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-4320-3
2
8
13
9
14
12
15
11
10
M04-4320-4
8
18
17
16
