TM 1-1520-238-23
11-526
11.120.
CPG TO PILOT LONGITUDINAL F.S. 118.50 CONTROL FLIGHT BRACKET ASSEMBLY
REMOVAL/INSTALLATION – continued
b. Remove bellcrank (2) from bracket assembly
(8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), and bushing
(13) from bracket (8) and bellcrank (2).
(4) Remove bellcrank (2).
NOTE
Laminated spacers are installed between
the bracket and the airframe. Use care
when removing the bracket to prevent the
spacers from delaminating.
c. Remove bracket (8) from airframe (14).
(1) Remove four nuts (15) and washers (16).
(2) Remove two bolts (17), two bolts (18), and
four spacers (19).
(3) Remove bracket (8).
11.120.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.120.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-4326-3
2
10
9
11
12
13
8
17
M04-4326-4
14
15
16
19
18
15
16
19
8
