TM 1-1520-238-23
Change 7
11-591
11.133.
PILOT COLLECTIVE PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION continued
b. Install rod (1) on bellcrank (2). Torque nut (4) 30
to 40 INCH-POUNDS.
(1) Aline rod (1) with bellcrank (2).
(2) Install bolt (5) through washer (6), bushing
(7), bellcrank (2), and rod (1).
(3) Check fit of self-retaining bolt (5) (para 11.1).
(4) Install nut (4). Torque nut (4) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (3).
c. Inspect (QA).
d. Perform collective flight control rigging main-
tenance operational check (TM 1-1520-238-T).
e. Install flex chute, turret, and area weapon
(TM 9-1090-208-23).
f. If removed install forward fuel cell retainer
panel (para 10.52A).
END OF TASK
6
1
3
M04-4372-6
2
5
7
4