TM 1-1520-238-23
11-852
11.193.
ASE PANEL SWITCH REPLACEMENT (AVIM)
11.193.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.193.2. Initial Setup
Tools:
Electrical tool kit (item 378, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Brush (item 34, App F)
Sealing compound (item 167, App F)
Personnel Required:
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
Equipment Conditions:
Ref
Condition
11.192
ASE panel light indicating panel removed
NOTE
This task is typical of ASE panel mounted
switches. The number of wires attached
to each switch will differ.
11.193.3. Removal
a. Remove connector and post assembly (1)
from ASE panel (2).
(1) Remove three screws (3).
(2) Position connector and post assembly (1) so
that switch (4) is accessible.
b. Detach wires (5) from switch (4).
(1) Identify wires (5) on switch (4).
(2) Remove five screws (6), lockwashers (7), and
terminal lugs (8).
GO TO NEXT PAGE
M04-1750-1
2
3
5
8
1
7
6
4
