TM 1-1520-238-23
11-949
11.220.
DIGITAL AUTOMATIC STABILIZATION EQUIPMENT (DASE) COMPUTER COVER SEAL
REPLACEMENT (AVIM) – continued
b. Remove DASE computer bottom cover seal
(6) from bottom cover (7) by scraping with
putty knife.
11.220.4. Cleaning
a. Remove residual adhesive.
(1) Wipe top or bottom cover with a clean cloth
and methyl ethyl ketone. Use cloth (item 52,
App F) and methyl ethyl ketone (item 124,
App F).
11.220.5. Installation
a. Install DASE computer cover seal (6) on bot-
tom cover (7).
(1) Apply adhesive sparingly to back surface of
seal (6). Use adhesive (item 20, App F).
(2) Mount seal (6) on cover (7).
(3) Splice at slight angle on any straight side of
cover (7).
(4) Allow adhesive to cure as per manufacturers
instructions.
GO TO NEXT PAGE
M04-2509-2
6
7
M04-2509-4
6
7
