TM 1-1520-238-23
11-1182
11.279.
TAIL ROTOR DE-ICE BRUSH AND SHUNT REPLACEMENT (AVIM) continued
WARNING
Soldering gun can cause severe burns
to personnel and start fires. Observe
all safety precautions when using
soldering gun. If injury occurs, seek
medical aid.
b. Remove solder from terminal stack-up (1).
Use soldering iron (TM 55-1500-323-24).
CAUTION
To prevent damage to brush block, en-
sure terminal stack-up does not turn
while removing nut.
c. Remove stack-up (1) from terminal (2).
(1) Hold stack-up (1).
(2) Remove and discard nut (3).
(3) Remove and discard top spacer (4).
(4) Remove top lug (5).
(5) Remove and discard bottom spacer (4).
(6) Remove bottom lug (5).
(7) Remove and discard washer (6).
GO TO NEXT PAGE
1
M04-3611-7
2
3
4
4
5
6
5
1
M04-3611-2