TM 1-1520-238-23
12-93
12.30.
RIGHT ENGINE FIREWALL LOUVER FIRE/OVERHEAT DETECTOR
REMOVAL/INSTALLATION - continued
12.30.3. Removal
CAUTION
Do not damage sensing element during
removal. Damage may occur when bend-
ing the element. A minimum bend radius
of 0.375 INCH shall be maintained to
minimize possible damage.
a. Remove fire/overheat detector (1) from fire de-
tector frame (2).
(1) Detach connector P1320 (3) from receptacle
(A698)J1 (4).
(2) Remove two screws (5), washers (6), and
spacers (7).
(3) Remove two clamps (8).
(4) Remove detector (1) from frame (2).
(5) Remove fire sensing element (9) from 19
spring tension clips (10).
12.30.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
12.30.5. Inspection
a. Check detector, sensing element, and frame
for scratches, nicks, and gouges (para 12.16).
b. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-3507-2
9
10
2
2
3
8
5
6
4
1
7
6
98
5