TM 1-1520-238-23
12-266
Change 1
12.58.
ENGINE ANTI-ICE RELAY BOX DISASSEMBLY/ASSEMBLY - continued
(8) Turn screw (3) into captive installing tool (31)
orifice.
(9) Place handle (32) of captive installing tool
(31) in open position.
(10) Squeeze handle (32) of captive installing tool
(31).
(11) Remove captive installing tool (31) from
screw (3).
(a) Check sleeve (33) for radial or axial play.
None allowed.
(b) Check sleeve (33) for smooth and even
flare. No cracks allowed.
c. Repair housing (2) by replacing anchor nut
(34) (TM 1-1500-204-23).
d. Repair housing (2) by replacing bracket
mount (35) (TM 1-1500-204-23).
e. Repair damaged connector (A337)J1 (25)
(para 9.138).
f. Repair damaged wire harness by replacing
wire (TM 55-1500-323-24).
12.58.7. Assembly
a. Install connector (A337)J1 (25) on cover (1).
(1) Position connector (25) on backside of cover
(1).
(2) Install four panel washers (28) and two adapt-
er nuts (26) on two adapter screws (27).
GO TO NEXT PAGE
32
31
33
3
1
M04-3546-10A
VIEW
ROTATED
M04-3546-1 1
35
2
34
M04-3546-12
1
28
26
27
25
