TM 1-1520-238-23
12-273
12.60.
ICE DETECTOR SIGNAL PROCESSOR CIRCUIT CARD ASSEMBLY (CCA) STACK
REMOVAL/INSTALLATION (AVIM) - continued
(2) Carefully insert CCA stack (5) in housing (2).
(3) Position EMI filter bracket (14) in housing (2).
(4) Install two screws (12) and washers (13).
(5) Position connectors (A311)J1 (8) and
(A311)J2 (11) on housing (2).
(6) Install retaining ring (7) and nut (6) on con-
nector (A311)J1 (8).
(7) Install retaining ring (10) and nut (9) on con-
nector (A311)J2 (11).
(8) Position CCA stack (5) in housing (2).
(9) Install four screws (15) on bottom of housing
(2).
(10) Install four screws (16) and washers (17) on
right and left sides of housing (2).
b. Inspect (QA).
c. Install cover (1) on housing (2).
(1) Position cover (1) on housing (2).
(2) Install four screws (3) and washers (4).
d. Perform appropriate test. Use Electronic Equip-
ment Test Facility (EETF) (TM 11-6625-3085-30).
END OF TASK
M04-3762-5
2
5
10
9
11
7
6
8
12
13
14
2
15
16
17
M04-3762-6
5
M04-3762-7
1
2
4
3
