TM 1-1520-238-23
16-122.2
Change 4
16.30A. RADAR JAMMER BLOWER ASSEMBLY REMOVAL/INSTALLATION - continued
16.30A.3. Removal
a. Install cover plate (1) on blower assembly (2).
(1) Obtain cover plate (1) from ASE stowage
bag.
(2) Slide cover plate (1) under retention clips (3)
and align notch on index pin (4).
(3) Lock two spring mounted fasteners (5) by
turning clockwise.
b. Identify and depin four wires (6) from splices
(7) (TM 55-1500-323-24).
c. Remove blower assembly (2) from two brack-
ets (8).
(1) Remove sealing compound from three bolts
(9) and washers (10).
(2) Remove three bolts (9) and washers (10)
from bracket (8).
(3) Remove blower assembly (2) from brackets
(8).
GO TO NEXT PAGE
M04-5180-2
3
1
5
2
4
7
6
M04-5180-4
M04-5180-5
2
9
10
10
9
8
VIEW
ROTATED
8
