TM 1-1520-238-23 D-262 90.00 HS4367-2 PLATE NSN 9905-01-221-0504 B END HS184-171 TAPE NOTE 7 -3 TUBE NOTE 5 A END A END B END F BEND ANGLE C L H TUBE TURN PLANE OF FIRST BEND MS21921-4D NUT NSN 4730-01-254-9841 MS21922-4 SLEEVE NSN 4730-00-289-8619 BOTH ENDS 7.06 3 11.50 83.30 91.80 2 10.28 87.60 83.30 4 39.50 103.90 2.05 16.60 5 40.10 -176.60 2.76 7 1.35 18.40 -175.30 6 4.62 32.00 8 46.40 50.60 6.32 1.43 9 46.40 180.00 10 -103.80 0.85 E 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 PART NUMBER 7-311710534 NOTES: 1 TUBE ASSEMBLY, METAL - MAKE FROM AL-ALY TUBING, TUBE SIZE 0.250 O.D x 0.028 WALL THICKNESS, NSN 4710-00-289-2780 2 DIMENSION C IS DISTANCE BETWEEN BENDS 3 DIMENSION L IS PREPARED LENGTH BEFORE BENDING 4 FIRST BEND STARTS FROM A END 5 FINISH - CHROMIC ANODIZE PER MIL-A-8625 TYPE 1 CLASS 1 6 IDENTIFY AND APPLY MIL-V-173 PROTECTIVE COATING 7 TAPE ARROW  POINTS TO B END L 55.92 55.92 55.92 55.92 55.92 55.92 55.92 55.92 55.92 55.92 BEND NUMBER DIMENSIONS C H F 1 1.21 27.50 0.0 4.51 1 1.04 99.80 2 85.90 20.60 1.52 PART NUMBER 7-311710507 PART NUMBER 7-311710508 1 1.33 5.20 4.50 3 3.68 16.50 63.30 2 1.39 3.80 -171.50 4 16.60 175.50 2.94 5 50.20 -93.00 2.31 6 3.57 52.30 -178.60 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.0 0.0 9.49 9.49 21.61 21.61 21.61 21.61 21.61 21.61 M04-4951 E BEND RADIUS Figure D-281. Tube Assembly PN 7-311710507, PN 7-311710508, PN 7-311710534