TM 1-1520-238-23
Change 6
D-431
0.25
1.00
0.25
2.24
0.38 R
1.12
0.12 STK
DRILL &
COUNTERSINK
FOR 10-24 X 3/8
SCREW 2 PLCS
1/2" DEEP (NOTE 6)
1.00
0.50
1.12
0.25 2 PLCS.
2.24
1/8 R 2 PLCS.
0.45 2 PLS.
0.37
1.00
1.38 DIA
0.60
60º
0.18
0.531
± 0.001
01.00
0.25
1.12
2.24
1.062 DIA ROD
+0.002 -0.000
DETAIL -3 TARGET PLATE
DETAIL -1 UPPER CAP
(NOTE 1)
DETAIL -2 LOWER CAP
(NOTE 1)
DRILL 1/8 X 0.375
0.69 R
TAP 1/4-20 2 PLCS
DRILL & COUNTERDRILL FOR
10-24 X 1 CAP SCREWS
2 PLCS.(NOTE 3)
1/8" DOWEL PRESS
FIT 2 PLCS. (NOTE 5)
DRILL & TAP 1/4-20 THRU
(NOTE 4)
HOLE PATTERN TO MATCH DETAIL-2
0.50
SOCKET HEAD SCREW
(2 PLCS) (NOTE 3)
DRILL 10-24 X 1/2"
0.40
SCRIBE CENTERLINES 0.005
DEEP (NOTE 7)
(NOTE 2)
0.50 DEEP
TAP 1/4-20
0.50 DEEP
TAP 1/4-20
1.74
1.74
0.25
M04-5193
NOTES:
1
MAKE FROM 1" X 2 3/4" SQ. BAR 1018 C.R.S.
2
MAKE FROM 1/8" X 1 1/2" X 2 3/4" BAR 1018 C.R.S.
3
USE (2) SOCKET HEAD CAP SCREWS 10-24 X 1",
MS16995-40, NSN 5305-00-988-7611
4
USE (1) SWIVEL PAD SET SCREWS 1/4-20 X 3/4", P/N
MS51977-54, NSN 5305-00-058-9382.
5
USE (2) 1/8" DOWEL PIN MS16555-627-54,
NSN 5315-00-825-1207.
6
USE (2) ANY FLAT HEAD CAP SCREWS 10-24 X 3/8"
7
FINISH TARGET PLATE GLOSS YELLOW AND FILL
CENTERLINES WITH BLACK PAINT.
8
BREAK ALL EDGES PER SHOP PRACTICES.
Figure D-474.
Main Rotor Mixer Rigging Alinement Tool, PN 7-311511100-81601
