TM 1-1520-238-MTF
2-39
PROCEDURE
TROUBLESHOOTING
REFERENCE
AFTER STARTING APU (CONT)
(d) Adjust FLIR GAIN to
minimize video noise.
(e) Laser trigger Press.
(f) BRSIT ENABLE switch
UP position, observe
tracking gates capture laser
spot, continue to fire laser
until tracking gates
disappear. If automatic
boresight does not appear
to function properly,
continue lasing for an
additional fifteen seconds
(0:15).
NOTE
If unable to capture laser spot, refer to cue
update procedure in Chapter 4,
paragraph F.
(g) BRSIT ENABLE switch
CENTER.
(h) Field of view select switch
Z.
(i) Repeat steps (e) thru (g).
(j) LSR SEL OFF.
(k) CPG ARM/SAFE switch
SAFE.
(l) PLT/GND ORIDE OFF.