TM 1-1520-238-PM 2–13 PHASE NO. Date Aircraft Serial No. Area Name and No. CREW STATIONS – 2 Inspect Phase Nos. Initial Action Taken Faults and/or Remarks Status Inspection Requirements ALL 7. Pilot seat belt and harness straps for cuts, fraying, and cleanliness. Strap fittings for corrosion and security. 2,4 8. Remove and inspect pilot overhead circuit breaker panels for security and loose or C missing fasteners. Circuit breakers for looseness or damage. All markings for readability. ALL 9. Pilot cyclic stick for security and worn bushings. Grip switches for damage or C looseness. All markings for readability. Base wiring harness for loose connections, chafing, or deterioration. Control linkage for damage, looseness, or evidence of interference. ALL 10. Pilot collective stick for security and worn bushings. Grip switches for C damage or looseness. all markings for readability. Base wiring harness for loose connections, chafing, or deterioration. Control linkage for damage, looseness, or evidence of interference. “FOD REMINDER” Check work area for tools and parts after completion of maintenance and inspection.