TM 1-1520-238-T-4
3–25
3–10.
MAIN LANDING GEAR – MAINTENANCE OPERATIONAL CHECK (cont)
3–10
Task
Result
p. Check left main wheel for rotation.
If left main wheel rotates, go to paragraph 3–16.
q. Release CPG left directional control pedal.
If left wheel does not rotate freely, go to paragraph
3–16.
r. Set parking brake using CPG directional
control pedals, and parking brake handle (at
pilot station). Observe that parking brake
handle does not retract.
If parking brake handle retracts, go to paragraph
3–14.
s. At CPG station, release parking brake by
pressing CPG directional control pedals.
Observe that parking brake handle (at pilot
station) retracts.
If parking brake handle does not retract, go to
paragraph 3–15.
t. Check left main wheel for freedom of
rotation.
If left main wheel does not rotate freely, go to
paragraph 3–12.
u. Check main wheel tires for uneven wear.
If uneven tire wear exists, go to
paragraph 3–17.
6. Remove jacks (TM 1-1520-238-23).
7. Set parking brake by applying toe pressure on top portion of directional control pedals and then pull pilot
parking brake handle. Release toe pressure on directional control pedals before releasing pilot parking brake
handle.
END OF TASK
