TM 1-1520-238-T-69–2599–75.RIGHT RED ANTI-COLLISION LIGHT – DOES NOT FLASH9–75Tools:NomenclaturePartNumberTool Kit, ElectricalSC518099CLA06Repairer’sMultimeter, DigitalAN/PSM-45Personnel Required:68XArmament/Electrical Systems RepairerOne person to assistReferences:TM 1-1520-238-23Equipment Conditions:RefConditionTM 1-1520-238-23Access provisions – RW8 cover removedWARNINGTurn off power before detaching orattaching wires and connectors. Highcurrent 28 VDC or 115 VAC is present.Failure to do so could result in deathor serious injury.Anti-collision lights are high intensitystrobe lights. Excessive viewing oflights could cause temporaryblindness. If injury occurs, seekmedical aid.1. Check for pulsating 200 VDC between P106-2and ground. Check for 400 VDC betweenP106-1 and ground.Is voltage present?YESGo to step 4.NOGo to step 2.2. Check for 200 VDC between J116-5 and ground.Check for 400 VDC between J116-2 and ground.Is voltage present?YESRepair open wire between:P116-2 and P106-1,P116-5 and P106-2. Go to paragraph 9–70.NOGo to step 3.3. Check for open between:P104-1 and J116-2,P104-2 and J116-5.Does open exist?YESRepair open wire. Go to paragraph 9–70.NOReplace anti-collision lightpower supply(TM 1-1520-238-23).4. Check for open between:P106-3 and P104-3,P106-5 and P104-5.Does open exist?YESRepair open wire. Go to paragraph 9–70.NOReplace right anti-collision light(TM 1-1520-238-23).END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
