TM 1-1520-238-T-7
11–156
11–22. DIRECTIONAL FLIGHT CONTROLS – RIGGING OPERATIONAL CHECK (cont)
11–22
PILOT DIRECTIONAL
PEDAL SPAD FS 115-
RIG PIN
LOCATION
CPG DIRECTIONAL
PEDAL SPAD
FS 59-
RIG PIN LOCATION
FS 542
DIRECTIONAL
BELLCRANK
LOCATION
FS 348 BELLCRANK
LOCATION
M70-169
Figure 11–94.
Directional Pedal, SPADS, and Bellcrank Location
WARNING
Maintenance personnel must be warned verbally prior to moving the
collective or cyclic stick. Any control activated can result in sudden blade
movement that can sever or crush fingers or hands.
NOTE
If referenced out of one paragraph or volume and into another for additional
troubleshooting, upon completion of the task, return to the maintenance
operational check for the original paragraph or volume.
1. Complete the rigging operational check as follows:
Task
Result
a. Center pilot directional pedals. In pilot FS
115 directional SPAD (fig. 11–95), install -5
rig pin. Tie warning flags to pilot and CPG
directional pedals.
