COCKPIT SEALING continued
2.48.4. Transparent Panel Sealing
a. Apply a bead of sealing compound along
edge of transparent panel (1) and structure
(2). Remove excess. Use sealing compound
(item 177, App F).
b. Inspect (QA).
2.48.5. Canopy Door Area Sealing
a. Adjust inboard striker plates (para 2.60).
b. If leakage persists, apply sealing compound
to bumper (3) for added compression.
(1) Apply sealing compound to bumper (3) until
adequate seal compression is obtained. Use
sealing compound (item 177, App F).
(2) Sealing compound must be smooth and
faired out gradually at ends.
c. Inspect (QA).
GO TO NEXT PAGE