MULTICHANNEL DIMMING CONTROLLER MODULE REMOVAL/INSTALLATION
a. Clean removed and attaching parts (para 1.47).
a. Check for cracks. None allowed.
b. Check removed and attaching parts for damage (para 9.61).
c. Check removed and attaching parts for corrosion (para 1.49).
d. Check for nicks, dents, scratches, and gouges (para 9.61).
e. Check for elongated bolt or screw holes. None allowed.
f. Check for sharp bends, distortion or deformation (para 9.61).
g. Check threaded holes for crossed, stripped, or flattened threads (TM 1-1500-204-23).
h. Check wiring and wire bundles for chafing, wear, cuts, breaks, and for cracked, broken, or burned
insulation (para 9.61).
i. Check nutplates and clinch nuts (where applicable) for loose mounting and damaged threads
j. Check connectors and receptacles for cracks, broken connections, bent pins, loose mounting, or
damaged threads (para 9.61).
k. Check attached parts and components for mounting security and for loose, missing, or damaged hard-
ware (para 9.61).
GO TO NEXT PAGE