TM 1-1520-238-23
1-76
1.25.
AIR TURBINE STARTER ASSEMBLY SERVICING – continued
a. Remove turbine starter drain plug (1).
(1) Remove lockwire from drain plug (1).
(2) Place rags under starter (2) to catch spilled
oil.
(3) Remove drain plug (1) from starter (2).
(4) Remove and discard packing (3).
(5) Vent system. Loosen oil filler cap (4).
(6) Allow starter (2) to drain.
b. Install drain plug (1) on starter (2). Torque drain
plug (1) to 25 INCH-POUNDS.
(1) Lubricate new packing (3). Use lubricating oil
(item 118, App F) or lubricating oil (item 119,
App F).
(2) Install new packing (3) on drain plug (1).
(3) Install drain plug (1) in starter (2).
(4) Torque drain plug (1) to 25 INCH-POUNDS.
(5) Lockwire drain plug (1) to starter (2). Use wire
(item 226, App F).
(6) Service starter (2) with lubricating oil
(item 118, App F) or lubricating oil (item 119,
App F).
(7) Remove oil filler cap (4) from starter (2).
(8) Push and turn oil filler cap (4) counterclock-
wise to remove.
GO TO NEXT PAGE
M04-3322-5
2
4
1
3
2
M04-3322-6
2
1
VIEW
ROTATED
3
1
M04-3322-2
2
4
