TM 1-1520-238-23
1-101
1.33.
MAIN TRANSMISSION OIL SAMPLING – continued
c. Install probe (1) in housing (2).
(1) Lubricate new packing (3). Use lubricating oil
(item 119, App F).
(2) Install packing (3) on probe (1).
(3) Insert probe (1) into housing (2).
(4) Push probe (1) in and turn clockwise 1/4-turn
until locked in housing (2).
NOTE
Probe is properly installed when knurl tips
aline with hex points.
d. Wipe up any spilled oil (para 1.47).
e. Service transmission with oil (para 1.32).
f. Install access panels L200 and R200 (para
2.2).
END OF TASK
2
1
M04-3045-4
3
