TM 1-1520-238-23
2-34
2.10.
PILOT/CPG COCKPIT THERMAL INSULATION AND HOOK AND PILE FASTENER
REMOVAL/INSTALLATION – continued
b. Install fasteners (2).
(1) Cut fastener (2) to desired length. Use
shears.
(2) Apply adhesive to back of fastener (2). Use
adhesive (item 18, App F) and brush
(item 34, App F).
(3) Allow adhesive to air dry 10 to 15 MINUTES.
(4) Apply a second coat of adhesive and allow to
dry. Use adhesive (item 18, App F) and brush
(item 34, App F).
(5) Position fastener (2) in place and press firmly.
(6) Allow adhesive to cure 4 HOURS before
installing insulation (1).
2.10.7. Installation
a. Install insulation (1) by working around ECS
outlets, tubing, or electrical wiring.
(1) Press fasteners (2) together.
END OF TASK
1
2
M04-3355-4
