TM 1-1520-238-23
2-73
2.29.
ANTI-ABRASION PROVISION REPAIR
2.29.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.29.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Industrial faceshield (item 129, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Cloth (item 48, App F)
Coating kit (item 60, App F)
Epoxy primer coating kit (item 78, App F)
Tape (item 208, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-345-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
This task is not for helicopters equipped with back-up control system (BUCS).
This task is typical for all applications of anti-abrasion provisions.
2.29.3. Removal
a. Remove loose, torn, or damaged anti-abrasion tape. Use plastic or wooden scraper as required.
2.29.4. Cleaning
a. Clean adhesive residue from surface (para 1.47).
2.29.5. Inspection
a. Check structure for damage and corrosion (para 2.12).
GO TO NEXT PAGE
